/boot/develop/haikuports/net-misc/openssh/work/openssh-5.4p1> grep -nri 'sysconfdir' *
INSTALL:121:./configure --prefix=/opt --sysconfdir=/etc/ssh
INSTALL:221:whatever you specified as your --sysconfdir (/usr/local/etc by default).
INSTALL:234:(${prefix}/etc or whatever you specified with --sysconfdir during
Makefile.in:17:sysconfdir=@sysconfdir@
Makefile.in:34:PATHS= -DSSHDIR=\"$(sysconfdir)\" \
Makefile.in:104:        -e 's|/etc/ssh/ssh_prng_cmds|$(sysconfdir)/ssh_prng_cmds|g' \
Makefile.in:105:        -e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \
Makefile.in:106:        -e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \
Makefile.in:107:        -e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \
Makefile.in:109:        -e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \
Makefile.in:110:        -e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \
Makefile.in:111:        -e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \
Makefile.in:112:        -e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \
Makefile.in:114:        -e 's|/etc/moduli|$(sysconfdir)/moduli|g' \
Makefile.in:115:        -e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \
Makefile.in:116:        -e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \
Makefile.in:246:        -$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config
Makefile.in:295:        if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \
Makefile.in:296:                $(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \
Makefile.in:298:        @if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \
Makefile.in:299:                $(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \
Makefile.in:301:                echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \
Makefile.in:303:        @if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \
Makefile.in:304:                $(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \
Makefile.in:306:                echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \
Makefile.in:309:                if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \
Makefile.in:310:                        $(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \
Makefile.in:312:                        echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \
Makefile.in:315:        @if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \
Makefile.in:316:                if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \
Makefile.in:317:                        echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \
Makefile.in:318:                        mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \
Makefile.in:320:                        $(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \
Makefile.in:323:                echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \
Makefile.in:328:                if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \
Makefile.in:329:                        echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \
Makefile.in:331:                        ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \
Makefile.in:333:                if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \
Makefile.in:334:                        echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \
Makefile.in:336:                        ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \
Makefile.in:338:                if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \
Makefile.in:339:                        echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \
Makefile.in:341:                        ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \
Makefile.in:346:        ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N ""
Makefile.in:347:        ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N ""
Makefile.in:348:        ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N ""
Makefile.in:351:        -rm -f $(DESTDIR)$(sysconfdir)/ssh_config
Makefile.in:352:        -rm -f $(DESTDIR)$(sysconfdir)/sshd_config
Makefile.in:353:        -rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds
Makefile.in:354:        -rmdir $(DESTDIR)$(sysconfdir)
buildpkg.sh.in:128:## Fill in some details, like prefix and sysconfdir
buildpkg.sh.in:129:for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir sysconfdir piddir srcdir
buildpkg.sh.in:221:             $FAKE_ROOT${sysconfdir}/sshd_config
buildpkg.sh.in:224:             $FAKE_ROOT${sysconfdir}/sshd_config
buildpkg.sh.in:227:     $FAKE_ROOT${sysconfdir}/sshd_config
buildpkg.sh.in:230:mv $FAKE_ROOT${sysconfdir}/ssh_config $FAKE_ROOT${sysconfdir}/ssh_config.default
buildpkg.sh.in:231:mv $FAKE_ROOT${sysconfdir}/sshd_config $FAKE_ROOT${sysconfdir}/sshd_config.default
buildpkg.sh.in:232:[ -f $FAKE_ROOT${sysconfdir}/ssh_prng_cmds ]  &&  \
buildpkg.sh.in:233:mv $FAKE_ROOT${sysconfdir}/ssh_prng_cmds $FAKE_ROOT${sysconfdir}/ssh_prng_cmds.default
buildpkg.sh.in:314:[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config ]  ||  \\
buildpkg.sh.in:315:     cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config.default \\
buildpkg.sh.in:316:             \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_config
buildpkg.sh.in:317:[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config ]  ||  \\
buildpkg.sh.in:318:     cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config.default \\
buildpkg.sh.in:319:             \${PKG_INSTALL_ROOT}${sysconfdir}/sshd_config
buildpkg.sh.in:320:[ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default ]  &&  {
buildpkg.sh.in:321:     [ -f \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds ]  ||  \\
buildpkg.sh.in:322:     cp -p \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds.default \\
buildpkg.sh.in:323:             \${PKG_INSTALL_ROOT}${sysconfdir}/ssh_prng_cmds
configure:634:sysconfdir
configure:772:sysconfdir='${prefix}/etc'
configure:1039:  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
configure:1041:    ac_prev=sysconfdir ;;
configure:1042:  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
configure:1044:    sysconfdir=$ac_optarg ;;
configure:1126:         datadir sysconfdir sharedstatedir localstatedir includedir \
configure:1278:  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
configure:28927:        piddir=`eval echo ${sysconfdir}`
configure:30177:sysconfdir!$sysconfdir$ac_delim
configure:30751:D=`eval echo ${sysconfdir}` ; D=`eval echo ${D}`
configure.ac:3854:      piddir=`eval echo ${sysconfdir}`
configure.ac:4168:D=`eval echo ${sysconfdir}` ; D=`eval echo ${D}`
contrib/aix/buildbff.sh:73:# Fill in some details from Makefile, like prefix and sysconfdir
contrib/aix/buildbff.sh:74:#    the eval also expands variables like sysconfdir=${prefix}/etc
contrib/aix/buildbff.sh:77:for confvar in prefix exec_prefix bindir sbindir libexecdir datadir mandir mansubdir sysconfdir piddir srcdir
contrib/aix/buildbff.sh:144:            $FAKE_ROOT/${sysconfdir}/sshd_config
contrib/aix/buildbff.sh:149:            $FAKE_ROOT/${sysconfdir}/sshd_config
contrib/aix/buildbff.sh:156:    mv $FAKE_ROOT/$sysconfdir/$cfgfile $FAKE_ROOT/$sysconfdir/$cfgfile.default
contrib/aix/buildbff.sh:160:if [ -f $FAKE_ROOT/$sysconfdir/ssh_prng_cmds ]
contrib/aix/buildbff.sh:162:    mv FAKE_ROOT/$sysconfdir/ssh_prng_cmds \
contrib/aix/buildbff.sh:163:            $FAKE_ROOT/$sysconfdir/ssh_prng_cmds.default
contrib/aix/buildbff.sh:202:    if [ ! -f $sysconfdir/\$cfgfile ]
contrib/aix/buildbff.sh:205:            cp $sysconfdir/\$cfgfile.default $sysconfdir/\$cfgfile
contrib/aix/buildbff.sh:231:if egrep '^[ \t]*UsePrivilegeSeparation[ \t]+no' $sysconfdir/sshd_config >/dev/null
contrib/aix/buildbff.sh:251:if [ -f "$sysconfdir/ssh_host_key" ] ; then
contrib/aix/buildbff.sh:252:    echo "$sysconfdir/ssh_host_key already exists, skipping."
contrib/aix/buildbff.sh:254:    $bindir/ssh-keygen -t rsa1 -f $sysconfdir/ssh_host_key -N ""
contrib/aix/buildbff.sh:256:if [ -f $sysconfdir/ssh_host_dsa_key ] ; then
contrib/aix/buildbff.sh:257:    echo "$sysconfdir/ssh_host_dsa_key already exists, skipping."
contrib/aix/buildbff.sh:259:    $bindir/ssh-keygen -t dsa -f $sysconfdir/ssh_host_dsa_key -N ""
contrib/aix/buildbff.sh:261:if [ -f $sysconfdir/ssh_host_rsa_key ] ; then
contrib/aix/buildbff.sh:262:    echo "$sysconfdir/ssh_host_rsa_key already exists, skipping."
contrib/aix/buildbff.sh:264:    $bindir/ssh-keygen -t rsa -f $sysconfdir/ssh_host_rsa_key -N ""
contrib/aix/buildbff.sh:347:for i in $bindir $sysconfdir $libexecdir $mandir/${mansubdir}1 $mandir/${mansubdir}8 $sbindir $datadir /usr/lpp/openssh
contrib/caldera/openssh.spec:11:%define _sysconfdir     /etc/ssh
contrib/caldera/openssh.spec:213:    %{buildroot}%{_sysconfdir}/sshd_config
contrib/caldera/openssh.spec:217:    %{buildroot}%{_sysconfdir}/sshd_config
contrib/caldera/openssh.spec:230:                   s:\@sysconfdir\@:%{_sysconfdir}:g; \
contrib/caldera/openssh.spec:246:    %__perl -pi -e 's:\@sysconfdir\@:%{_sysconfdir}:g; \
contrib/caldera/openssh.spec:310:%dir %{_sysconfdir}
contrib/caldera/openssh.spec:311:%config %{_sysconfdir}/ssh_config
contrib/caldera/openssh.spec:342:%config %{_sysconfdir}/moduli
contrib/caldera/openssh.spec:343:%config %{_sysconfdir}/sshd_config
contrib/caldera/ssh-host-keygen:11:keydir=@sysconfdir@
contrib/caldera/sshd.init:64:  SVIemptyConfig @sysconfdir@/sshd_config && exit 6
contrib/caldera/sshd.init:66:  if [ ! \( -f @sysconfdir@/ssh_host_key -a            \
contrib/caldera/sshd.init:67:       -f @sysconfdir@/ssh_host_key.pub \) -a     \
contrib/caldera/sshd.init:68:       ! \( -f @sysconfdir@/ssh_host_rsa_key -a        \
contrib/caldera/sshd.init:69:       -f @sysconfdir@/ssh_host_rsa_key.pub \) -a \
contrib/caldera/sshd.init:70:       ! \( -f @sysconfdir@/ssh_host_dsa_key -a        \
contrib/caldera/sshd.init:71:       -f @sysconfdir@/ssh_host_dsa_key.pub \) ]; then
contrib/cygwin/Makefile:11:sysconfdir=/etc
contrib/cygwin/Makefile:12:defaultsdir=$(sysconfdir)/defaults/etc
contrib/cygwin/Makefile:25:move-config-files: $(DESTDIR)$(sysconfdir)/ssh_config $(DESTDIR)$(sysconfdir)/sshd_config
contrib/cygwin/Makefile:27:     mv $(DESTDIR)$(sysconfdir)/ssh_config $(DESTDIR)$(defaultsdir)
contrib/cygwin/Makefile:28:     mv $(DESTDIR)$(sysconfdir)/sshd_config $(DESTDIR)$(defaultsdir)
contrib/cygwin/README:197:      --sysconfdir=/etc \
contrib/cygwin/ssh-host-config:32:SYSCONFDIR=/etc
contrib/cygwin/ssh-host-config:49:  if [ ! -f "${SYSCONFDIR}/ssh_host_key" ]
contrib/cygwin/ssh-host-config:51:    csih_inform "Generating ${SYSCONFDIR}/ssh_host_key"
contrib/cygwin/ssh-host-config:52:    ssh-keygen -t rsa1 -f ${SYSCONFDIR}/ssh_host_key -N '' > /dev/null
contrib/cygwin/ssh-host-config:55:  if [ ! -f "${SYSCONFDIR}/ssh_host_rsa_key" ]
contrib/cygwin/ssh-host-config:57:    csih_inform "Generating ${SYSCONFDIR}/ssh_host_rsa_key"
contrib/cygwin/ssh-host-config:58:    ssh-keygen -t rsa -f ${SYSCONFDIR}/ssh_host_rsa_key -N '' > /dev/null
contrib/cygwin/ssh-host-config:61:  if [ ! -f "${SYSCONFDIR}/ssh_host_dsa_key" ]
contrib/cygwin/ssh-host-config:63:    csih_inform "Generating ${SYSCONFDIR}/ssh_host_dsa_key"
contrib/cygwin/ssh-host-config:64:    ssh-keygen -t dsa -f ${SYSCONFDIR}/ssh_host_dsa_key -N '' > /dev/null
contrib/cygwin/ssh-host-config:156:       csih_warning "Check your ${SYSCONFDIR}/sshd_config file!"
contrib/cygwin/ssh-host-config:171:  if cmp "${SYSCONFDIR}/sshd_config" "${SYSCONFDIR}/defaults/${SYSCONFDIR}/sshd_config" >/dev/null 2>&1
contrib/cygwin/ssh-host-config:173:    csih_inform "Updating ${SYSCONFDIR}/sshd_config file"
contrib/cygwin/ssh-host-config:174:    sshdconfig_tmp=${SYSCONFDIR}/sshd_config.$$
contrib/cygwin/ssh-host-config:178:     < ${SYSCONFDIR}/sshd_config \
contrib/cygwin/ssh-host-config:180:    mv "${sshdconfig_tmp}" ${SYSCONFDIR}/sshd_config
contrib/cygwin/ssh-host-config:183:    echo >> ${SYSCONFDIR}/sshd_config
contrib/cygwin/ssh-host-config:184:    echo "UsePrivilegeSeparation ${privsep_used}" >> ${SYSCONFDIR}/sshd_config
contrib/cygwin/ssh-host-config:192:  local _inetcnf="${SYSCONFDIR}/inetd.conf"
contrib/cygwin/ssh-host-config:193:  local _inetcnf_tmp="${SYSCONFDIR}/inetd.conf.$$"
contrib/cygwin/ssh-host-config:194:  local _inetcnf_dir="${SYSCONFDIR}/inetd.d"
contrib/cygwin/ssh-host-config:226:    csih_install_config "${_sshd_inetd_conf}"   "${SYSCONFDIR}/defaults"
contrib/cygwin/ssh-host-config:227:    if cmp "${SYSCONFDIR}/defaults${_sshd_inetd_conf}" "${_sshd_inetd_conf}" >/dev/null 2>&1
contrib/cygwin/ssh-host-config:367:       chown "${run_service_as}" ${SYSCONFDIR}/ssh*
contrib/cygwin/ssh-host-config:497:# Check for ${SYSCONFDIR} directory
contrib/cygwin/ssh-host-config:498:csih_make_dir "${SYSCONFDIR}" "Cannot create global configuration files."
contrib/cygwin/ssh-host-config:499:chmod 775 "${SYSCONFDIR}"
contrib/cygwin/ssh-host-config:500:setfacl -m u:system:rwx "${SYSCONFDIR}"
contrib/cygwin/ssh-host-config:534:csih_install_config "${SYSCONFDIR}/ssh_config"   "${SYSCONFDIR}/defaults"
contrib/cygwin/ssh-host-config:535:if cmp "${SYSCONFDIR}/ssh_config" "${SYSCONFDIR}/defaults/${SYSCONFDIR}/ssh_config" >/dev/null 2>&1
contrib/cygwin/ssh-host-config:539:    csih_inform "Updating ${SYSCONFDIR}/ssh_config file with requested port"
contrib/cygwin/ssh-host-config:540:    echo "Host localhost" >> ${SYSCONFDIR}/ssh_config
contrib/cygwin/ssh-host-config:541:    echo "    Port ${port_number}" >> ${SYSCONFDIR}/ssh_config
contrib/cygwin/ssh-host-config:546:csih_install_config "${SYSCONFDIR}/sshd_config"   "${SYSCONFDIR}/defaults"
contrib/cygwin/ssh-host-config:547:if ! cmp "${SYSCONFDIR}/sshd_config" "${SYSCONFDIR}/defaults/${SYSCONFDIR}/sshd_config" >/dev/null 2>&1
contrib/cygwin/ssh-host-config:549:  grep -q UsePrivilegeSeparation ${SYSCONFDIR}/sshd_config && privsep_configured=yes
contrib/cygwin/ssh-user-config:32:SYSCONFDIR=/etc
contrib/cygwin/ssh-user-config:130:  pwdhome=$(awk -F: '{ if ( $3 == '${uid}' ) print $6; }' < ${SYSCONFDIR}/passwd)
contrib/cygwin/ssh-user-config:134:      "There is no home directory set for you in ${SYSCONFDIR}/passwd." \
contrib/cygwin/ssh-user-config:141:      "${pwdhome} is set in ${SYSCONFDIR}/passwd as your home directory" \
contrib/cygwin/ssh-user-config:150:    csih_warning "Your home directory in ${SYSCONFDIR}/passwd is set to root (/). This is not recommended!"
contrib/cygwin/ssh-user-config:304:if [ ! -f ${SYSCONFDIR}/passwd ]
contrib/cygwin/ssh-user-config:307:    "${SYSCONFDIR}/passwd is nonexistant. Please generate an ${SYSCONFDIR}/passwd file" \
contrib/redhat/openssh.spec:45:# If this is RHL 6.x, the default configuration has sysconfdir in /usr/etc.
contrib/redhat/openssh.spec:47:%define _sysconfdir /etc
contrib/redhat/openssh.spec:192:        --sysconfdir=%{_sysconfdir}/ssh \
contrib/redhat/openssh.spec:250:mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/ssh
contrib/redhat/openssh.spec:280:install -m 755 -d $RPM_BUILD_ROOT%{_sysconfdir}/profile.d/
contrib/redhat/openssh.spec:281:install -m 755 contrib/redhat/gnome-ssh-askpass.csh $RPM_BUILD_ROOT%{_sysconfdir}/profile.d/
contrib/redhat/openssh.spec:282:install -m 755 contrib/redhat/gnome-ssh-askpass.sh $RPM_BUILD_ROOT%{_sysconfdir}/profile.d/
contrib/redhat/openssh.spec:341:%attr(0755,root,root) %dir %{_sysconfdir}/ssh
contrib/redhat/openssh.spec:342:%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ssh/moduli
contrib/redhat/openssh.spec:362:%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ssh/ssh_config
contrib/redhat/openssh.spec:386:%attr(0755,root,root) %dir %{_sysconfdir}/ssh
contrib/redhat/openssh.spec:387:%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ssh/sshd_config
contrib/redhat/openssh.spec:405:%attr(0755,root,root) %config %{_sysconfdir}/profile.d/gnome-ssh-askpass.*
contrib/suse/openssh.spec:138:          --sysconfdir=%{_sysconfdir}/ssh \
contrib/suse/openssh.spec:205:%attr(0755,root,root) %dir %{_sysconfdir}/ssh
contrib/suse/openssh.spec:206:%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/ssh/ssh_config
contrib/suse/openssh.spec:207:%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ssh/sshd_config
contrib/suse/openssh.spec:208:%attr(0600,root,root) %config(noreplace) %{_sysconfdir}/ssh/moduli
openbsd-compat/Makefile.in:3:sysconfdir=@sysconfdir@
openbsd-compat/regress/Makefile.in:3:sysconfdir=@sysconfdir@
opensshd.init.in:12:sysconfdir=@sysconfdir@
opensshd.init.in:17:PidFile=`grep "^PidFile" ${sysconfdir}/sshd_config | tr "=" " " | awk '{print $2}'`
opensshd.init.in:20:HOST_KEY_RSA1=$sysconfdir/ssh_host_key
opensshd.init.in:21:HOST_KEY_DSA=$sysconfdir/ssh_host_dsa_key
opensshd.init.in:22:HOST_KEY_RSA=$sysconfdir/ssh_host_rsa_key